Instructions

1 Remove the cable that is attached to the “Internet” port on the rear of your DSL or cable modem.

2 Plug the Ethernet cable into the “Internet” port on the modem and plug the other end of the cable into the “Internet” port on the rear of the D-Link router. Attach the power adapter to the port on the rear of the router and plug the adapter’s cord into a outlet.

3 Remove the power cord from your modem and wait 10 seconds before plugging it back in. This will reinitialize your modem and force it to establish a connection to the D-Link router. Your router will immediately begin distributing a wireless network with the “D-Link” network name.

4 Connect your computer to one of Ethernet ports on the rear of the router and open a Web browser. Type “http://192.168.0.1” into the address bar and press “Enter.” Enter “admin” into the username field and type “admin” again into the password field. Click “OK” to open the wireless configuration page. Click “Wireless Security Setup Wizard” to create a wireless password for your router’s network. Click “Apply” to save the changes to the router’s settings.

Windows – PuTTyPuTTy: PuTTy is a free application that can be downloaded from chiark.greenend.org.uk

1.In PuTTY, under Session, enter your Domain Name as the Host Name

2.Under SSH, choose 2 from Preferred SSH Protocol Version

3.Under SSH -> Auth in PuTTY, you will need to specify where your private key can be found. Remember this is where you saved the private key on your local computer. Click Browse to locate the file on your computer.

4.If you wish to have your username automatically sent to the server when connecting, under Connection -> Data in PuTTY, you will see a field for “Auto-login username”. Type your account username there.

5.Save your settings to be used in future sessions – Under Sessions, type a name (such as “my site”) in the Saved Sessions box and click Save.